Quantm i120 2”
The latest technology at your fingertips. A Quantm electric pump from Graco saves 80% energy and has a payback period of less than a year.
- 450 lpm
- No compressed air needed
- Has max. working pressure of 4.2 bar
- Easy installation
Graco Key data
- Max. capacity
- 450 l/min
- Max. pressure
- 5 bar
- Voltage
- 230 Volt 50 Hz AC
Save 80% energy
The Quantm series offers all the advantages of pneumatically driven diaphragm pumps but with 80% less energy consumption and a low noise level (40 dBA).
Specifications
Performance · vs. the full range
Specifications
- Max. compressed air pressure
- 5 bar
- Max. temperature
- Depends on type of membrane
- Voltage
- 230 Volts 50 Hz AC
Pump Body Material
- Aluminum
- Polypropylene
- Conductive Polypropylene
- RVS
- PVDF
- Cast Iron
Classification
Diaphragm materials
- Aluminium
- Polypropyleen
- Geleidend Polypropyleen
- RVS
- PVDF
- Gietijzer
Matching accessories
Air-treatment components in this pump's size — from filter regulator to dry-run protection.
-
00-FR 1/2Filter-regulator
- Connection
- G 1/2"
- Max. flow
- 6,700 l/min
- For pumps
- 1" t/m 2"
-
00-LUB 1/2Proportional lubricator
- Connection
- G 1/2"
- Max. flow
- 5,000 l/min
- For pumps
- 1" t/m 2"
-
00-GRO 1/2Needle valve
- Connection
- G 1/2"
- Max. flow
- 3,600 l/min
- For pumps
- 1" t/m 2"
-
00-SSV 1/2Slow start valve
- Connection
- G 1/2"
- Max. flow
- 3,500 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 1/2On/off 3/2-valve (manual)
- Connection
- G 1/2"
- Max. flow
- 11,000 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 24V 1/2On/off 3/2-valve (electrically)
- Connection
- G 1/2"
- Max. flow
- 3,150 l/min
- For pumps
- 1" t/m 2"
-
00-FSV G1/2Dry run protection
- Connection
- G1/2"
- Max. flow
- 5,800 l/min
- For pumps
- 1" t/m 2"
-
AOD-15-BSPPulsation damper AOD-15
- Connection
- G 1½" (BSP)
- For pumps
- 1½"
- AOD-20-BSP
Pulsation damper AOD-20
- Connection
- G 2" (BSP)
- For pumps
- 2"
Questions about the Quantm i120 2”?
-
How much can the Quantm i120 2” pump?
The Quantm i120 2” pumps up to 450 l/min.
-
What is the maximum pressure of the Quantm i120 2”?
The maximum pressure of the Quantm i120 2” is 5 bar.
-
What fluid temperature can the Quantm i120 2” handle?
That depends on the diaphragm you choose. These materials are available for the Quantm i120 2”: Aluminium, Polypropyleen, Geleidend Polypropyleen, RVS, PVDF, Gietijzer. The chemical resistance list gives the temperature limit per material.
-
Which diaphragm materials are available for the Quantm i120 2”?
The Quantm i120 2” is available with these diaphragm materials: Aluminium, Polypropyleen, Geleidend Polypropyleen, RVS, PVDF, Gietijzer.
-
Is the Quantm i120 2” air-operated or electric?
The Quantm i120 2” is electrically driven (230 Volt 50 Hz AC), so it needs no compressed air.
-
What documentation is available for the Quantm i120 2”?
The manual, the brochure and the datasheet for the Quantm i120 2” are on this page as PDFs — download them directly, no form.
-
What is the Quantm i120 2” used for?
The Quantm i120 2” is a Plastic diaphragm pump from Graco, in the Graco electric series. Application area: Industrial.
Also check out these pumps
-
Graco Quantm h120 2”
- Max. capacity
- 450 l/min
- Max. pressure
- 5 bar
-
Graco Quantm h30 1”
- Max. capacity
- 115 l/min
- Max. pressure
- 7 bar
-
Graco Quantm h80 1 1⁄2”
- Max. capacity
- 300 l/min
- Max. pressure
- 7 bar
-
Graco Quantm i230 3”
- Max. capacity
- 870 l/min
- Max. pressure
- 6.9 bar