All pumps

HAP DM 40/125

The sanitary series pumps are specially designed to meet the requirements of the food, beverage, pharmaceutical and cosmetic industries. They operate with unlubricated compressed air and have maintenance-free check valves made of NBR, EPDM, PTFE or stainless steel 316. The possible visual inspection of the wet parts of these pumps is one of the main advantages of this pump series.

  • DN 40
  • Stainless Steel
  • Has max. working pressure of 8 bar
  • Easy installation
Request a quote Manual (PDF)
HAP-Sanitair Holland Air Pumps

Key data

Max. capacity
125 l/min
Max. pressure
8 bar
Max. particle size
8 mm
Air connection
1/4″
Fluid connection
DN 40
Ask Gerrit

Made to Staying clean

The design allows visual inspection of the wet parts of the pump. There are no hidden areas where bacterial growth can occur. The Tri-Clamp pipe connections and casing screws are quickly detachable for complete inspection and cleaning. The pump is also suitable for on-site cleaning (C.I.P. and S.I.P.). By rotating the pump 180o after cleaning, it empties.

Specifications

Datasheet (PDF)

Performance · vs. the full range

Max. capacity 125 l/min
0 1,041 l/min max. in our range
Max. pressure 8 bar
0 21 bar max. in our range
Max. particle size 8 mm
0 76 mm max. in our range

Specifications

Max. compressed air pressure
8 bar
Max. temperature
Depends on type of membrane
Air connection
1/4″
Fluid connections
DN 40

Membranes

Material
EPDM
Material
PTFE

Classification

Documentation PDF Brochure PDF Manual Manual, brochure and datasheet as PDF. Download straight away, no form required.

Matching accessories

Air-treatment components in this pump's size — from filter regulator to dry-run protection.

All accessories

Questions about the HAP DM 40/125?

  • How much can the HAP DM 40/125 pump?

    The HAP DM 40/125 pumps up to 125 l/min.

  • What is the maximum pressure of the HAP DM 40/125?

    The maximum pressure of the HAP DM 40/125 is 8 bar.

  • Can the HAP DM 40/125 pump liquids with solids?

    Yes. The HAP DM 40/125 handles solids up to 8 mm.

  • What fluid temperature can the HAP DM 40/125 handle?

    That depends on the diaphragm you choose. These materials are available for the HAP DM 40/125: EPDM, PTFE. The chemical resistance list gives the temperature limit per material.

  • Which diaphragm materials are available for the HAP DM 40/125?

    The HAP DM 40/125 is available with these diaphragm materials: EPDM, PTFE.

  • What connections does the HAP DM 40/125 have?

    The HAP DM 40/125 has a 1/4″ air connection and a DN 40 fluid connection.

  • Is the HAP DM 40/125 air-operated or electric?

    The HAP DM 40/125 is air-operated: it runs on compressed air and needs no electrical connection.

Also check out these pumps

All Holland Air Pumps pumps