AHS25
This series of diaphragm pumps is made for real heavy-duty work: chemical waste, tough/liquid sediment, that's where the 5 pumps in this series are at their best. Not surprisingly, with their capacities of 70 - 200 lpm, particle sizes of 4 - 12 mm, air and liquid connections of 19 - 32 mm respectively and their viscosity of 5000 - 10000 mPa.s.
- 1/2″ pump
- Housing in Polyethylene
- Extremely robust
- Safe and durable
Almatec Key data
- Max. capacity
- 167 l/min
- Max. pressure
- 15 bar
- Max. particle size
- 5 mm
- Max. temperature
- 70 °C
- Air connection
- 6 mm (1/4″)
- Fluid connection
- 25 mm (1″)
Extremely robust Specially for high pressure
The AHD/AHS pumps descend from the earlier AH series. The pumps are the ultimate solution for your high-pressure applications up to 15 bar. The AHD series is equipped with a pressure booster that doubles the inlet pressure (max. 7 bar) to 15 bar. The AHS series does without a pressure booster. With these, the outlet pressure results in the same as the inlet pressure (max 15 bar).
Specifications
Performance · vs. the full range
Specifications
- Max. compressed air pressure
- 15 bar
- Air connection
- 6 mm (1/4″)
- Fluid connections
- 25 mm (1″)
Membranes
- EPDM
- NBR
- PTFE/EPDM compound
Matching accessories
Air-treatment components in this pump's size — from filter regulator to dry-run protection.
-
00-FR 1/4Filter-regulator
- Connection
- G 1/4"
- Max. flow
- 1,600 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-FR 1/2Filter-regulator
- Connection
- G 1/2"
- Max. flow
- 6,700 l/min
- For pumps
- 1" t/m 2"
-
00-LUB 1/4Proportional lubricator
- Connection
- G 1/4"
- Max. flow
- 1,900 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-LUB 1/2Proportional lubricator
- Connection
- G 1/2"
- Max. flow
- 5,000 l/min
- For pumps
- 1" t/m 2"
-
00-GRO 1/4Needle valve
- Connection
- G 1/4"
- Max. flow
- 1,100 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-GRO 1/2Needle valve
- Connection
- G 1/2"
- Max. flow
- 3,600 l/min
- For pumps
- 1" t/m 2"
-
00-SSV 1/4Slow start valve
- Connection
- G 1/4"
- Max. flow
- 1,100 l/min
- For pumps
- 1/8" t/m 3/4"
- 00-SSV 1/2
Slow start valve
- Connection
- G 1/2"
- Max. flow
- 3,500 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 1/4On/off 3/2-valve (manual)
- Connection
- G 1/4"
- Max. flow
- 2,800 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-AUV 1/2On/off 3/2-valve (manual)
- Connection
- G 1/2"
- Max. flow
- 11,000 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 24V 1/4On/off 3/2-valve (electrically)
- Connection
- G 1/4"
- Max. flow
- 1,150 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-AUV 24V 1/2On/off 3/2-valve (electrically)
- Connection
- G 1/2"
- Max. flow
- 3,150 l/min
- For pumps
- 1" t/m 2"
-
00-FSV G1/2Dry run protection
- Connection
- G1/2"
- Max. flow
- 5,800 l/min
- For pumps
- 1" t/m 2"
-
AOD-10-BSPPulsation damper AOD-10
- Connection
- G 1" (BSP)
- For pumps
- 1"
Questions about the AHS25?
-
How much can the AHS25 pump?
The AHS25 pumps up to 167 l/min.
-
What is the maximum pressure of the AHS25?
The maximum pressure of the AHS25 is 15 bar.
-
Can the AHS25 pump liquids with solids?
Yes. The AHS25 handles solids up to 5 mm.
-
What fluid temperature can the AHS25 handle?
The AHS25 handles fluids up to 70 °C.
-
Which diaphragm materials are available for the AHS25?
The AHS25 is available with these diaphragm materials: EPDM, Buna-N, PTFE.
-
What connections does the AHS25 have?
The AHS25 has a 6 mm (1/4″) air connection and a 25 mm (1″) fluid connection.
-
Is the AHS25 air-operated or electric?
The AHS25 is air-operated: it runs on compressed air and needs no electrical connection.
