All pumps

E10

The E-Series is ideally equipped in everything to perform in processes involving the handling of the most diverse but above all dangerous aggressive and chemical substances. Perfection down to the smallest detail, everything needed to pump your chemicals safely and reliably.

  • 3/8″ pump
  • Robust design
  • Economical in maintenance
  • Low noise level
Request a quote Manual (PDF)
Almatec_E-Serie Almatec

Key data

Max. capacity
23 l/min
Max. pressure
7 bar
Max. particle size
3 mm
Max. temperature
100 °C
Air connection
3 mm (1/8″)
Fluid connection
10 mm (3/8″)
Ask Gerrit

Safe and accurate Chemistry pumps

The Almatec E Series represents the latest generation of plastic double diaphragm pumps. These pumps are offered in a PE and a PTFE version, for both materials there is also an ATEX version available. Among the as many as 7 different sizes you are sure to find a pump suitable for your application! There are also various options available to expand the E series as desired.

duo-single

Specifications

Datasheet (PDF)

Performance · vs. the full range

Max. capacity 23 l/min
0 1,041 l/min max. in our range
Max. pressure 7 bar
0 21 bar max. in our range
Max. particle size 3 mm
0 76 mm max. in our range
Max. temperature 100 °C
0 177 °C max. in our range

Specifications

Max. compressed air pressure
7 bar
Air connection
3 mm (1/8″)
Fluid connections
10 mm (3/8″)

Membranes

  • EPDM
  • NBR
  • PTFE/EPDM compound

Classification

Documentation PDF Manual PDF Brochure PDF Datasheet Manual, brochure and datasheet as PDF. Download straight away, no form required.

Matching accessories

Air-treatment components in this pump's size — from filter regulator to dry-run protection.

All accessories

Questions about the E10?

  • How much can the E10 pump?

    The E10 pumps up to 23 l/min.

  • What is the maximum pressure of the E10?

    The maximum pressure of the E10 is 7 bar.

  • Can the E10 pump liquids with solids?

    Yes. The E10 handles solids up to 3 mm.

  • What fluid temperature can the E10 handle?

    The E10 handles fluids up to 100 °C.

  • Which diaphragm materials are available for the E10?

    The E10 is available with these diaphragm materials: EPDM, Buna-N, PTFE.

  • What connections does the E10 have?

    The E10 has a 3 mm (1/8″) air connection and a 10 mm (3/8″) fluid connection.

  • Is the E10 air-operated or electric?

    The E10 is air-operated: it runs on compressed air and needs no electrical connection.

Also check out these pumps

All Almatec pumps