E25
The E-Series is ideally equipped in everything to perform in processes involving the handling of the most diverse but above all dangerous aggressive and chemical substances. Perfection down to the smallest detail, everything needed to pump your chemicals safely and reliably.
- 1″ pump
- Robust design
- Economical in maintenance
- Low noise level
Almatec Key data
- Max. capacity
- 135 l/min
- Max. pressure
- 7 bar
- Max. particle size
- 6 mm
- Max. temperature
- 120 °C
- Air connection
- 6 mm (1/4″)
- Fluid connection
- 25 mm (1″)
Safe and accurate Chemistry pumps
The Almatec E Series represents the latest generation of plastic double diaphragm pumps. These pumps are offered in a PE and a PTFE version, for both materials there is also an ATEX version available. Among the as many as 7 different sizes you are sure to find a pump suitable for your application! There are also various options available to expand the E series as desired.
Specifications
Performance · vs. the full range
Specifications
- Max. compressed air pressure
- 7 bar
- Air connection
- 6 mm (1/4″)
- Fluid connections
- 25 mm (1″)
Membranes
- EPDM
- NBR
- PTFE/EPDM compound
Matching accessories
Air-treatment components in this pump's size — from filter regulator to dry-run protection.
-
00-FR 1/4Filter-regulator
- Connection
- G 1/4"
- Max. flow
- 1,600 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-FR 1/2Filter-regulator
- Connection
- G 1/2"
- Max. flow
- 6,700 l/min
- For pumps
- 1" t/m 2"
-
00-LUB 1/4Proportional lubricator
- Connection
- G 1/4"
- Max. flow
- 1,900 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-LUB 1/2Proportional lubricator
- Connection
- G 1/2"
- Max. flow
- 5,000 l/min
- For pumps
- 1" t/m 2"
-
00-GRO 1/4Needle valve
- Connection
- G 1/4"
- Max. flow
- 1,100 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-GRO 1/2Needle valve
- Connection
- G 1/2"
- Max. flow
- 3,600 l/min
- For pumps
- 1" t/m 2"
-
00-SSV 1/4Slow start valve
- Connection
- G 1/4"
- Max. flow
- 1,100 l/min
- For pumps
- 1/8" t/m 3/4"
- 00-SSV 1/2
Slow start valve
- Connection
- G 1/2"
- Max. flow
- 3,500 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 1/4On/off 3/2-valve (manual)
- Connection
- G 1/4"
- Max. flow
- 2,800 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-AUV 1/2On/off 3/2-valve (manual)
- Connection
- G 1/2"
- Max. flow
- 11,000 l/min
- For pumps
- 1" t/m 2"
-
00-AUV 24V 1/4On/off 3/2-valve (electrically)
- Connection
- G 1/4"
- Max. flow
- 1,150 l/min
- For pumps
- 1/8" t/m 3/4"
-
00-AUV 24V 1/2On/off 3/2-valve (electrically)
- Connection
- G 1/2"
- Max. flow
- 3,150 l/min
- For pumps
- 1" t/m 2"
-
00-FSV G1/2Dry run protection
- Connection
- G1/2"
- Max. flow
- 5,800 l/min
- For pumps
- 1" t/m 2"
-
AOD-10-BSPPulsation damper AOD-10
- Connection
- G 1" (BSP)
- For pumps
- 1"
Questions about the E25?
-
How much can the E25 pump?
The E25 pumps up to 135 l/min.
-
What is the maximum pressure of the E25?
The maximum pressure of the E25 is 7 bar.
-
Can the E25 pump liquids with solids?
Yes. The E25 handles solids up to 6 mm.
-
What fluid temperature can the E25 handle?
The E25 handles fluids up to 120 °C.
-
Which diaphragm materials are available for the E25?
The E25 is available with these diaphragm materials: EPDM, Buna-N, PTFE.
-
What connections does the E25 have?
The E25 has a 6 mm (1/4″) air connection and a 25 mm (1″) fluid connection.
-
Is the E25 air-operated or electric?
The E25 is air-operated: it runs on compressed air and needs no electrical connection.
